6-SPEED OVERDRIVE SUPER KITS (Jims)
|
|||||
 1103-0008 |
Starting at $2,218.95
|
||||
- Features
- Notes
- Request Information
- Send to a Friend
- All gear sets use 2.94:1 close-ratio 1st gear that widens bike’s speed range in 1st gear and lessens the rpm drop when shifting into second
- Overdrive 6th gear (.86:1 ratio) lowers engine rpm by almost 475 at 75 mph
- Made in the U.S.A. NOTE: Requires speedometer sensor block-off plate kit (#2404-0114; see ELECTRICAL section); if speedometer is not driven from transmission, then two block-off plates kits are required.
- Designed to turn stock 5-speed transmissions into a 6-speed
- Reduces vibration that creates wear
- Creates a more relaxing cruising speed
Requires speedometer be recalibrated.
Trap door extends 3/8” farther to right than stock part. Alteration
to some parts that attach to or around the trap door may be required.
When installing in 02-06 FLHT/FLHR/FLTR/FLHX transmission case,
you will need an oil filler spout spacer (#DS-196233; see ELECTRICAL
section) for clearance transmission to motor vent line.
Trap door extends 3/8” farther to right than stock part. Alteration
to some parts that attach to or around the trap door may be required.
When installing in 02-06 FLHT/FLHR/FLTR/FLHX transmission case,
you will need an oil filler spout spacer (#DS-196233; see ELECTRICAL
section) for clearance transmission to motor vent line.
